StoneL telephone 1 (218) 739-5774 U.S.A.

 

StoneL - Valve Communications Solutions

Profibus

Profibus originated in the European market and has become a worldwide standard because of its performance attributes. Profibus consists of several variations which are designed for use in special applications. The two Profibus versions most commonly used are Profibus-DP (Distributed Peripherals) and Profibus-PA (Process Automation).

Profibus-PA was developed to connect directly into Profibus-DP and may be used in intrinsically safe applications. DP uses the RS485 physical layer while PA uses the IEC 61158-2 physical layer designed primarily for process applications.

Profibus-DP features

  • High speed data access capable of handling time critical functions. 
  • Networks up to 32 devices (up to 126 with repeaters) on a 4-wire network; (2 wires for signal and 2 wires for power). 
  • Trunk network may extend up to 4,000 feet (1220 meters) per segment. 
  • Dramatically cuts wiring costs and commissioning over conventional applications. 
  • Interfaces readily into newer control systems. 
  • Used extensively throughout Europe with support in North America.
 

 Related links

Profibus-DP

Profibus-DP is recognized as a high performance bus network capable of transmitting thousands of I/O point information in less than a few milliseconds. For that reason it has been used extensively for fast response control applications such as turbine servos and variable speed drives.













Profibus-PA

Profibus-PA was designed as a substitute for HART and 4 to 20mA signal transmission in the process industries. It uses function blocks designed around process industry requirements and uses the IEC 61158-2 physical layer, making it compatible with intrinsic safety circuits.

Profibus-PA links to the control architecture via Profibus-DP with a segment coupler or link as shown. Segment couplers are signal converters that adapt the RS-485 signals to the 61158-2 signal level. They are transparent from the bus protocol point of view. If segment couplers are used, the baud rate on the DP (RS-485) segment must be restricted to 45 Kbits/sec. The segment coupler also injects power into the PA network for the segment instrumentation.

Links are independent slaves on the DP network which represent all devices connected to the 61158-2 segment. When PA segments are connected using links there is no limit to the baud rate on the DP segment which enables faster overall bus network performance.


Profibus Network
Products ______________ Protocols About Contact Us Quick Links
© StoneL                 Privacy Policy